Posts for tag: dental implants
Along with fessing up to cherry tree surgery and tossing silver dollars across the Potomac River, George Washington is also famously known for wearing wooden dentures. Although we can't verify the first two legends, we can confirm Washington did indeed wear dentures, but not of wood—hippopotamus ivory and (yikes!) donated human teeth—but not wood.
Although they seem primitive to us today, Washington's dentures were the best that could be produced at the time. Still, the Father of Our Country suffered mightily from his dentures, both in physical discomfort and social embarrassment. Regarding the latter, our first president's dentures contorted his lips and mouth in an unattractive way, faintly discernable in Gilbert Stuart's famous portraits of our first president.
If only Washington had lived in a later era, he might have been able to avoid all that dental unpleasantness. Besides better versions of dentures, he might also have benefited from an entirely new way of replacing teeth—dental implants. Just four decades after this state-of-the-art restoration was first introduced, we now recognize implants as the "Gold Standard" for tooth replacement.
In recognition of Dental Implant Month in September, here are 4 reasons why dental implants might be the right tooth replacement choice for you.
Life-like. While other restorations provide a reasonable facsimile of natural teeth, implants take like-likeness to another level. That's because the implant replaces the root, which then allows for a life-like crown to be attached to it. By positioning it properly, implants and the subsequent crown can blend seamlessly with other teeth to create an overall natural smile appearance.
Durable. Implants owe their long-term durability (more than 95% still functioning after ten years) to a special affinity between bone and the titanium post imbedded in the jaw. Bone cells readily grow and adhere to the implant's surface, resulting over time in a more secure hold than other restorations. By the way, this increased bone growth around implants can help slow or even stop progressive bone loss.
Low impact. Dental bridges are another well-regarded tooth replacement option, but with a major downside: The natural teeth on either side of the missing teeth gap must be crowned to support the bridge. To prepare them, we must permanently alter these teeth. Implants, though, don't require this form of support, and so have a negligible effect on other teeth.
Versatile. Although implants are a practical choice for individual tooth restorations, multiple teeth replacements can get expensive. Implants, though, can also be incorporated into other restorations: Four to six implants can support an entire removable denture or fixed bridge. Implant-supported restorations are more durable than the traditional versions, while also encouraging better bone health.
If you need to replace teeth and would like to consider dental implants, see us for a complete examination. You may be an ideal candidate for this "best of the best" dental restoration.
Losing all your teeth can dramatically impact your life for the worst. Fortunately, we can give you your "teeth" back. The most common way, at least until a few decades ago, is with custom dentures, which reasonably restore life-like appearance and dental function. But it does have one major drawback—it can't stop bone loss.
Loss of bone in the jaws often occurs with missing teeth. Normally, the bone continuously generates newer cells to replace older ones that have died. Chewing stimulates this growth as the force generated travels up through the teeth to the bone. But when teeth go missing, new bone growth slows, eventually causing the bone's volume and density to decrease.
Dentures can't reactivate this lost stimulation, and so bone loss may continue. Dentures even accelerate this loss as the compressive forces applied to the bony ridge are detrimental. This often leads to a "loosening" of a denture's fit that can make them uncomfortable and less secure to wear.
Today, however, patients with total tooth loss have another option that could alleviate the problem of bone loss—dental implants. Since their inception forty years ago, implants have become the preferred method of both dentists and patients for tooth replacement.
Implants consist of a titanium metal post that's surgically imbedded into the jawbone. Bone cells are attracted to this particular metal, readily multiplying and adhering to the implant's titanium surface. Because of this, an implant can slow or even stop bone loss.
Most people are familiar with the single tooth implant with an attached lifelike crown. Although this use of implants could be used to restore total tooth loss, it can be quite costly replacing over two dozen teeth individually.
But implants could still be part of the answer for someone with complete tooth loss, because they can also be used to support traditional restorations. A few implants strategically placed around the jaw can support either a removable denture or a fixed bridge.
Besides being a cost-effective way to add support to these traditional tooth replacements, the inclusion of implants will likely decrease continuing bone loss. Most importantly, it can give you back your dental function—and your smile to boot.
If you would like more information on dental implant options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “New Teeth in One Day.”
If you've decided on a dental implant to replace a missing tooth, you've made a great choice. Implants are a big favorite of both dentists and patients, not only for their life-likeness, but also their durability. Studies show that more than 95% of implants survive after ten years.
As you may know, single tooth implants are composed of two main parts: a metal post (usually titanium) imbedded in the jawbone; and a life-like crown affixed to the end of the post. But what you may not know is that there are two ways to attach the crown—either with screws or with dental cement.
Neither way is superior to the other—both have their own set of advantages and disadvantages. A cemented crown, for instance, usually looks more like a natural tooth than a screw-retained crown (more about that later) and dentists have more flexibility in making them look natural.
But cemented crowns require an additional piece of hardware called an abutment to better match it with the implant, something unnecessary with a screw-retained crown. Some people can also experience a reaction to the cement resulting in inflammation or even bone loss. And once installed, removing the crown later for repair or replacement is much more difficult than with a screw-retained crown.
Besides attaching directly to the implant, screw-retained crowns don't require cement and are more easily attached and removed. But the screw-hole can pose some aesthetic problems: Although it can be filled with a tooth-colored filling, the tooth's appearance isn't as ideal as a cemented crown.
So, which one is best for you? That will depend on the type and location of teeth being replaced, as well as your dentist's preferences. For instance, a more attractive cemented crown may be better for a visible front tooth, while a screw-retained crown might be a good choice for a back premolar or molar where appearance isn't as big a factor.
In the end, it's likely your dentist will discuss the pros and cons for each method as it pertains to your individual case. Whichever way your crown attaches, the end result will still be a life-like tooth that could last you for years to come.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Crowns Attach to Implants.”
When dental implants hit the scene in the 1980s, they revolutionized the field of dental restorations. But as groundbreaking as they were then, they're even more advanced now.
Some of the advancements have to do with improvements in implant design and manufacturing. Implant sizes and shapes were once quite limited, but today they come in a variety of forms to better match the types of teeth they replace.
But there has also been important progress in complementary technologies that help us realize better outcomes. Many of these other advances have had a positive impact on the planning and surgical stages of implant installation.
CT/CBCT scanning. For the best outcome, it's critical to install an implant at the most appropriate location on the jaw. This can be difficult to determine, however, because of the location of oral and facial structures like nerves or sinuses that might interfere with implant placement. But using a type of computer tomography (CT) scanning called cone beam CT, we can produce a 3-D computer graphic image that helps us navigate possible obstructions as we pinpoint the ideal location for an implant.
Digital smile displays. We're now able to produce digital models of the mouth, which can assist with more than implant placement—we can also use them to visualize what a new smile with implants will look like before we install them. This is especially helpful in situations where only a few teeth need to be replaced: We want to ensure that the new implant crowns blend seamlessly with the remaining teeth for the most natural appearance.
Custom-made surgical guides. We've been using surgical guides to mark the exact drilling locations during implant surgery for many years. But 3-D printing technology can now help us produce surgical guides that are even more useful and precise. Using a 3-D printer, we can produce oral devices based on the patient's individual dental dimensions captured through digital scanning. That produces a better fit for the guide on the teeth and more accurate implant placement.
Together, these and other technological advances are helping us achieve even more successful results. Not only can they help us produce implant outcomes that can last for years or even decades, but also the most beautiful smiles possible.
If you would like more information on dental implant restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Technology Aids Dental Implant Therapy.”
Ed Helms is best known for his role as the self-absorbed, Ivy League sales rep, Andy Bernard, on television's The Office. But to millions of fans he's also Stu, a member of a bachelor trip to Las Vegas in the 2009 movie The Hangover. In it, Stu and his friends wake up from a wild night on the Strip to find some things missing: the groom-to-be, their memories and, for Stu, a front tooth.
In reality, the missing tooth gag wasn't a Hollywood makeup or CGI (computer-generated imagery) trick—it was Ed Helm's actual missing tooth. According to Helms, the front tooth in question never developed and he had obtained a dental implant to replace it. He had the implant crown removed for the Hangover movie and then replaced after filming.
Helms' dental situation isn't that unusual. Although most of the 170 million-plus teeth missing from Americans' mouths are due to disease or trauma, a few happened because the teeth never formed. While most of these congenitally missing teeth are in the back of the mouth, a few, as in Helms' case, involve front teeth in the “smile zone,” which can profoundly affect appearance.
Fortunately, people missing undeveloped teeth have several good options to restore their smiles and dental function. The kind of tooth missing could help determine which option to use. For example, a bridge supported by the teeth on either side of the gap might work well if the teeth on either side are in need of crowns.
If the missing tooth happens to be one or both of the lateral incisors (on either side of the centermost teeth), it could be possible to move the canine teeth (the pointy ones, also called eye teeth) to fill the gap. This technique, known as canine substitution, may also require further modification—either by softening the canines' pointed tips, crowning them or applying veneers—to help the repositioned teeth look more natural.
The optimal solution, though, is to replace a missing tooth with a dental implant which then has a lifelike crown attached to it, as Ed Helms did to get his winning smile. Implant-supported replacement teeth are closest to natural teeth in terms of both appearance and function. Implants, though, shouldn't be placed until the jaw has fully developed, usually in early adulthood. A younger person may need a temporary restoration like a bonded bridge or a partial denture until they're ready for an implant.
Whatever the method, there's an effective way to restore missing teeth. Seeing us for an initial exam is the first step toward your own winning smile.